Shi Channels
Download scriptThis script is designed to automatically identify and draw a linear trend channel on your trading chart. It analyzes historical price action to find specific structural points, allowing it to project a visual "corridor" that helps traders see the direction and momentum of the market.
Core Logic and Workflow
1. Identifying Structural Peaks and Valleys The script begins by scanning back through the recent history of the market (up to 300 bars). It looks for "fractals," which are significant high or low points in price movement. Depending on the timeframe you are using (e.g., 1-minute vs. 4-hour charts), the script automatically adjusts its sensitivity to ensure it captures meaningful price extremes rather than minor market noise.
2. Establishing the Channel Boundaries Once the script identifies two significant structural points—typically a high and a low—it calculates the "step" or slope between them. This slope determines the angle of the trend:
- If the channel is rising, the script calculates the upward trajectory.
- If the channel is falling, it calculates the downward trajectory.
3. Dynamic Price Correction (The Boundary Check) One of the most sophisticated parts of this logic is its "boundary check." The script doesn't just draw a straight line between two points and leave it; it actively monitors if the current price has broken out or breached the established limits. If it detects that the price has moved outside the predicted corridor, it identifies the specific point of breach to ensure the channel remains relevant to current market conditions.
4. Visual Representation After performing these calculations, the script draws three distinct visual elements on your chart:
- The Upper Bound: A solid lime-colored line representing the upper limit of the price action.
- The Lower Bound: A solid lime-colored line representing the lower limit of the price action.
- The Median Line: A dotted line that represents the exact midpoint of the channel, often used by traders to identify the "equilibrium" price or the center of the current trend.
Summary for the User
In simple terms, this tool looks at where the market has recently "hit a wall" (highs and lows) and draws a visual path showing where the price is likely to stay within. It automatically adjusts its math based on your timeframe and updates the lines to reflect the most current and accurate trend corridor available.
//+------------------------------------------------------------------+
//| SHI_Channel.mq4 |
//| Copyright © 2004, Shurka & Kevin |
//| |
//+------------------------------------------------------------------+
#property copyright "Copyright © 2004, Shurka & Kevin"
#property link ""
#property indicator_chart_window
#property indicator_buffers 1
#property indicator_color1 Red
double ExtMapBuffer1[];
//---- input parameters
extern int AllBars=240;
extern int BarsForFract=0;
int CurrentBar=0;
double Step=0;
int B1=-1,B2=-1;
int UpDown=0;
double P1=0,P2=0,PP=0;
int i=0,AB=300,BFF=0;
int ishift=0;
double iprice=0;
datetime T1,T2;
//+------------------------------------------------------------------+
//| Custom indicator initialization function |
//+------------------------------------------------------------------+
int init()
{
//---- indicators
SetIndexStyle(0,DRAW_ARROW);
SetIndexArrow(0,164);
SetIndexBuffer(0,ExtMapBuffer1);
SetIndexEmptyValue(0,0.0);
//----
return(0);
}
//+------------------------------------------------------------------+
//| Custor indicator deinitialization function |
//+------------------------------------------------------------------+
int deinit()
{
//----
//----
return(0);
}
void DelObj()
{
ObjectDelete("TL1");
ObjectDelete("TL2");
ObjectDelete("MIDL");
}
//+------------------------------------------------------------------+
//| Custom indicator iteration function |
//+------------------------------------------------------------------+
int start()
{
int counted_bars=IndicatorCounted();
//----
if ((AllBars==0) || (Bars<AllBars)) AB=Bars; else AB=AllBars; //AB-êîëè÷åñòâî îáñ÷èòûâàåìûõ áàðîâ
if (BarsForFract>0)
BFF=BarsForFract;
else
{
switch (Period())
{
case 1: BFF=12; break;
case 5: BFF=48; break;
case 15: BFF=24; break;
case 30: BFF=24; break;
case 60: BFF=12; break;
case 240: BFF=15; break;
case 1440: BFF=10; break;
case 10080: BFF=6; break;
default: DelObj(); return(-1); break;
}
}
CurrentBar=2; //ñ÷èòàåì ñ òðåòüåãî áàðà, ÷òîáû ôðàêòàë "çàêðåïèëñÿ
B1=-1; B2=-1; UpDown=0;
while(((B1==-1) || (B2==-1)) && (CurrentBar<AB))
{
//UpDown=1 çíà÷èò ïåðâûé ôðàêòàë íàéäåí ñâåðõó, UpDown=-1 çíà÷èò ïåðâûé ôðàêòàë
//íàéäåí ñíèçó, UpDown=0 çíà÷èò ôðàêòàë åù¸ íå íàéäåí.
//Â1 è Â2 - íîìåðà áàðîâ ñ ôðàêòàëàìè, ÷åðåç íèõ ñòðîèì îïîðíóþ ëèíèþ.
//Ð1 è Ð2 - ñîîòâåòñòâåííî öåíû ÷åðåç êîòîðûå áóäåì ëèíèþ ïðîâîäèòü
if((UpDown<1) && (CurrentBar==Lowest(Symbol(),Period(),MODE_LOW,BFF*2+1,CurrentBar-BFF)))
{
if(UpDown==0) { UpDown=-1; B1=CurrentBar; P1=Low[B1]; }
else { B2=CurrentBar; P2=Low[B2];}
}
if((UpDown>-1) && (CurrentBar==Highest(Symbol(),Period(),MODE_HIGH,BFF*2+1,CurrentBar-BFF)))
{
if(UpDown==0) { UpDown=1; B1=CurrentBar; P1=High[B1]; }
else { B2=CurrentBar; P2=High[B2]; }
}
CurrentBar++;
}
if((B1==-1) || (B2==-1)) {DelObj(); return(-1);} // Çíà÷èò íå íàøëè ôðàêòàëîâ ñðåäè 300 áàðîâ 8-)
Step=(P2-P1)/(B2-B1);//Âû÷èñëèëè øàã, åñëè îí ïîëîæèòåëüíûé, òî êàíàë íèñõîäÿùèé
P1=P1-B1*Step; B1=0;//ïåðåñòàâëÿåì öåíó è ïåðâûé áàð ê íóëþ
//À òåïåðü îïîðíóþ òî÷êó ïðîòèâîïîëîæíîé ëèíèè êàíàëà.
ishift=0; iprice=0;
if(UpDown==1)
{
PP=Low[2]-2*Step;
for(i=3;i<=B2;i++)
{
if(Low[i]<PP+Step*i) { PP=Low[i]-i*Step; }
}
if(Low[0]<PP) {ishift=0; iprice=PP;}
if(Low[1]<PP+Step) {ishift=1; iprice=PP+Step;}
if(High[0]>P1) {ishift=0; iprice=P1;}
if(High[1]>P1+Step) {ishift=1; iprice=P1+Step;}
}
else
{
PP=High[2]-2*Step;
for(i=3;i<=B2;i++)
{
if(High[i]>PP+Step*i) { PP=High[i]-i*Step;}
}
if(Low[0]<P1) {ishift=0; iprice=P1;}
if(Low[1]<P1+Step) {ishift=1; iprice=P1+Step;}
if(High[0]>PP) {ishift=0; iprice=PP;}
if(High[1]>PP+Step) {ishift=1; iprice=PP+Step;}
}
//Òåïåðü ïåðåñòàâèì êîíå÷íóþ öåíó è áàð íà ÀÂ, ÷òîáû ëèíèè êàíàëà ðèñîâàëèñü ïîäëèííåå
P2=P1+AB*Step;
T1=Time[B1]; T2=Time[AB];
//Åñëè íå áûëî ïåðåñå÷åíèÿ êàíàëà, òî 0, èíà÷å ñòàâèì ïñèñó.
if(iprice!=0) ExtMapBuffer1[ishift]=iprice;
DelObj();
ObjectCreate("TL1",OBJ_TREND,0,T2,PP+Step*AB,T1,PP);
ObjectSet("TL1",OBJPROP_COLOR,Lime);
ObjectSet("TL1",OBJPROP_WIDTH,2);
ObjectSet("TL1",OBJPROP_STYLE,STYLE_SOLID);
ObjectCreate("TL2",OBJ_TREND,0,T2,P2,T1,P1);
ObjectSet("TL2",OBJPROP_COLOR,Lime);
ObjectSet("TL2",OBJPROP_WIDTH,2);
ObjectSet("TL2",OBJPROP_STYLE,STYLE_SOLID);
ObjectCreate("MIDL",OBJ_TREND,0,T2,(P2+PP+Step*AB)/2,T1,(P1+PP)/2);
ObjectSet("MIDL",OBJPROP_COLOR,Lime);
ObjectSet("MIDL",OBJPROP_WIDTH,1);
ObjectSet("MIDL",OBJPROP_STYLE,STYLE_DOT);
//----
return(0);
}
//+------------------------------------------------------------------+
Comments