Easy_iCustom_and_Alerts_v1
Download scriptThis tool is designed to simplify the process of monitoring multiple technical indicators on your trading platform simultaneously without requiring any programming knowledge. It serves as a bridge that allows you to load external indicators and receive real-time alerts specifically when those indicators interact with one another—such as when one price line crosses over another.
Core Functionality
The script is built to handle up to three different indicators at once. Instead of manually watching the charts to see when lines intersect, you can configure this tool to "listen" for those specific movements. When a crossover occurs, the system automatically triggers an alert notification, identifying exactly which pair and which specific indicator parameters were involved.
How it Works (The Logic)
- Data Fetching: The script acts as a collector. It reaches out to other indicators you have installed on your platform, pulls their current data based on the settings you provide (like timeframe, period, or line number), and brings that information into one central dashboard.
- Crossover Detection: The logic is programmed to track the "direction" of these indicators. It constantly monitors the relationship between two lines (e.g., Line A vs. Line B). If Line A was previously below Line B and moves above it, the script recognizes this change in state.
- Smart Alerts: To prevent your screen from being flooded with constant notifications, the logic is designed to only trigger an alert at the moment the "cross" actually happens. It remembers the previous state of the lines so that it doesn't keep alerting you while the lines remain in their new positions.
- Flexible Configurations: You can customize the monitoring in several ways:
- Compare three different indicators against each other.
- Compare two indicators and leave the third slot empty.
- Compare specific lines from a single indicator (e.g., comparing an upper band to a lower band).
User Experience
From a user's perspective, the complexity of the "iCustom" function (the technical way the platform calls outside data) is hidden. You simply fill out a form with the names and settings of the tools you already use. The script does the heavy lifting of calculating those values in the background and only interrupts you when a specific trading signal—a crossover—is detected.
/*-----------------------------+
| |
| Shared by www.Aptrafx.com |
| |
+------------------------------*/
//+------------------------------------------------------------------+
//| Easy iCustom and Alerts.mq4 |
//| Codersguru |
//| http://www.forex-tsd.com |
//+------------------------------------------------------------------+
#property copyright "Codersguru and cockeyedcowboy"
#property link "http://www.forex-tsd.com"
#property indicator_chart_window
#property indicator_buffers 3
#property indicator_color1 Red
#property indicator_color2 Blue
#property indicator_color3 Yellow
double ExtMapBuffer1[];
double ExtMapBuffer2[];
double ExtMapBuffer3[];
extern bool Alert_On_Crossing = true;
extern string Pair_1="EURUSD";
extern string Indicator_Name_1="Moving Averages";
extern int TimeFrame_1=0;
extern int Line_1=0;
extern double Parameter1_1 = 12;
extern double Parameter2_1 = 0;
extern double Parameter3_1 = 1;
extern double Parameter4_1 = -100;
extern double Parameter5_1 = -100;
extern string Pair_2="EURUSD";
extern string Indicator_Name_2="Moving Averages";
extern int TimeFrame_2=0;
extern int Line_2=0;
extern double Parameter1_2 = 144;
extern double Parameter2_2 = 0;
extern double Parameter3_2 = 1;
extern double Parameter4_2 = -100;
extern double Parameter5_2 = -100;
extern string Pair_3="EURUSD";
extern string Indicator_Name_3="Moving Averages";
extern int TimeFrame_3=0;
extern int Line_3=0;
extern double Parameter1_3 = 169;
extern double Parameter2_3 = 0;
extern double Parameter3_3 = 1;
extern double Parameter4_3 = -100;
extern double Parameter5_3 = -100;
int Crossed_1 (double line1 , double line2)
{
static int last_direction = 0;
static int current_direction = 0;
static bool first_time = true;
if(first_time == true)
{
first_time = false;
return (0);
}
if(line1>line2)current_direction = 1; //up
if(line1<line2)current_direction = 2; //down
if(current_direction != last_direction) //changed
{
last_direction = current_direction;
return (last_direction);
}
else
{
return (0); //not changed
}
}
int Crossed_2 (double line1 , double line2)
{
static int last_direction = 0;
static int current_direction = 0;
static bool first_time = true;
if(first_time == true)
{
first_time = false;
return (0);
}
if(line1>line2)current_direction = 1; //up
if(line1<line2)current_direction = 2; //down
if(current_direction != last_direction) //changed
{
last_direction = current_direction;
return (last_direction);
}
else
{
return (0); //not changed
}
}
int Crossed_3 (double line1 , double line2)
{
static int last_direction = 0;
static int current_direction = 0;
static bool first_time = true;
if(first_time == true)
{
first_time = false;
return (0);
}
if(line1>line2)current_direction = 1; //up
if(line1<line2)current_direction = 2; //down
if(current_direction != last_direction) //changed
{
last_direction = current_direction;
return (last_direction);
}
else
{
return (0); //not changed
}
}
int init()
{
SetIndexStyle(0,DRAW_LINE);
SetIndexBuffer(0,ExtMapBuffer1);
SetIndexStyle(1,DRAW_LINE);
SetIndexBuffer(1,ExtMapBuffer2);
SetIndexStyle(2,DRAW_LINE);
SetIndexBuffer(2,ExtMapBuffer3);
if (Pair_1 == "NULL") Pair_1 = NULL;
if (Pair_2 == "NULL") Pair_2 = NULL;
if (Pair_3 == "NULL") Pair_3 = NULL;
return(0);
}
int deinit()
{
return(0);
}
int start()
{
int counted_bars=IndicatorCounted();
if (counted_bars>0) counted_bars--;
int pos=Bars-counted_bars;
while(pos>=0)
{
ExtMapBuffer1[pos]= GetIcustomValue(1,pos);
ExtMapBuffer2[pos]= GetIcustomValue(2,pos);
ExtMapBuffer3[pos]= GetIcustomValue(3,pos);
pos--;
}
static int isCrossed_1 = 0;
static int isCrossed_2 = 0;
static int isCrossed_3 = 0;
if (Alert_On_Crossing)
{
if(Parameter1_1!=-100 && Parameter2_1!=-100 && Parameter3_1!=-100) //1 - 2 - 3
{
isCrossed_1 = Crossed_1(GetIcustomValue(1,0),GetIcustomValue(2,0));
if (isCrossed_1 == 1) Alert (Pair_1 + ": " + Indicator_Name_1 + " (" + Parameter1_1 + ") has been crossed " + Indicator_Name_2 + " (" + Parameter1_2 + ") Upward!" );
if (isCrossed_1 == 2) Alert (Pair_1 + ": " + Indicator_Name_1 + " (" + Parameter1_1 + ") has been crossed " + Indicator_Name_2 + " (" + Parameter1_2 + ") Downward!" );
isCrossed_2 = Crossed_2(GetIcustomValue(2,0),GetIcustomValue(3,0));
if (isCrossed_2 == 1) Alert (Pair_1 + ": " + Indicator_Name_2 + " (" + Parameter1_2 + ") has been crossed " + Indicator_Name_3 + " (" + Parameter1_3 + ") Upward!" );
if (isCrossed_2 == 2) Alert (Pair_1 + ": " + Indicator_Name_2 + " (" + Parameter1_2 + ") has been crossed " + Indicator_Name_3 + " (" + Parameter1_3 + ") Upward!" );
isCrossed_3 = Crossed_3(GetIcustomValue(1,0),GetIcustomValue(3,0));
if (isCrossed_3 == 1) Alert (Pair_1 + ": " + Indicator_Name_1 + " (" + Parameter1_1 + ") has been crossed " + Indicator_Name_3 + " (" + Parameter1_3 + ") Upward!" );
if (isCrossed_3 == 2) Alert (Pair_1 + ": " + Indicator_Name_1 + " (" + Parameter1_1 + ") has been crossed " + Indicator_Name_3 + " (" + Parameter1_3 + ") Upward!" );
}
if(Parameter1_1!=-100 && Parameter2_1!=-100 && Parameter3_1==-100) // 1 - 2
{
isCrossed_1 = Crossed_1(GetIcustomValue(1,0),GetIcustomValue(2,0));
if (isCrossed_1 == 1) Alert (Pair_1 + ": " + Indicator_Name_1 + " (" + Parameter1_1 + ") has been crossed " + Indicator_Name_2 + " (" + Parameter1_2 + ") Upward!" );
if (isCrossed_1 == 2) Alert (Pair_1 + ": " + Indicator_Name_1 + " (" + Parameter1_1 + ") has been crossed " + Indicator_Name_2 + " (" + Parameter1_2 + ") Upward!" );
}
if(Parameter1_1!=-100 && Parameter2_1==-100 && Parameter3_1!=-100) // 1 - 3
{
isCrossed_1 = Crossed_1(GetIcustomValue(1,0),GetIcustomValue(3,0));
if (isCrossed_1 == 1) Alert (Pair_1 + ": " + Indicator_Name_1 + " (" + Parameter1_1 + ") has been crossed " + Indicator_Name_3 + " (" + Parameter1_3 + ") Upward!" );
if (isCrossed_1 == 2) Alert (Pair_1 + ": " + Indicator_Name_1 + " (" + Parameter1_1 + ") has been crossed " + Indicator_Name_3 + " (" + Parameter1_3 + ") Upward!" );
}
if(Parameter1_1==-100 && Parameter2_1!=-100 && Parameter3_1!=-100) // 2 - 3
{
isCrossed_1 = Crossed_1(GetIcustomValue(2,0),GetIcustomValue(3,0));
if (isCrossed_1 == 1) Alert (Pair_2 + ": " + Indicator_Name_2 + " (" + Parameter1_2 + ") has been crossed " + Indicator_Name_3 + " (" + Parameter1_3 + ") Upward!" );
if (isCrossed_1 == 2) Alert (Pair_2 + ": " + Indicator_Name_2 + " (" + Parameter1_2 + ") has been crossed " + Indicator_Name_3 + " (" + Parameter1_3 + ") Upward!" );
}
}
return(0);
}
double GetIcustomValue(int level ,int shift)
{
double value =0;
switch(level)
{
case 1 :
{
if(Parameter1_1!=-100 && Parameter2_1==-100 && Parameter3_1==-100 && Parameter4_1==-100 && Parameter5_1==-100)
value = iCustom(Pair_1,TimeFrame_1,Indicator_Name_1,Parameter1_1,Line_1,shift);
if(Parameter1_1!=-100 && Parameter2_1!=-100 && Parameter3_1==-100 && Parameter4_1==-100 && Parameter5_1==-100)
value = iCustom(Pair_1,TimeFrame_1,Indicator_Name_1,Parameter1_1,Parameter2_1,Line_1,shift);
if(Parameter1_1!=-100 && Parameter2_1!=-100 && Parameter3_1!=-100 && Parameter4_1==-100 && Parameter5_1==-100)
value = iCustom(Pair_1,TimeFrame_1,Indicator_Name_1,Parameter1_1,Parameter2_1,Parameter3_1,Line_1,shift);
if(Parameter1_1!=-100 && Parameter2_1!=-100 && Parameter3_1!=-100 && Parameter4_1!=-100 && Parameter5_1==-100)
value = iCustom(Pair_1,TimeFrame_1,Indicator_Name_1,Parameter1_1,Parameter2_1,Parameter3_1,Parameter4_1,Line_1,shift);
if(Parameter1_1!=-100 && Parameter2_1!=-100 && Parameter3_1!=-100 && Parameter4_1!=-100 && Parameter5_1!=-100)
value = iCustom(Pair_1,TimeFrame_1,Indicator_Name_1,Parameter1_1,Parameter2_1,Parameter3_1,Parameter4_1,Parameter5_1,Line_1,shift);
break;
}
case 2 :
{
if(Parameter1_2!=-100 && Parameter2_2==-100 && Parameter3_2==-100 && Parameter4_2==-100 && Parameter5_2==-100)
value = iCustom(Pair_2,TimeFrame_2,Indicator_Name_2,Parameter1_2,Line_2,shift);
if(Parameter1_2!=-100 && Parameter2_2!=-100 && Parameter3_2==-100 && Parameter4_2==-100 && Parameter5_2==-100)
value = iCustom(Pair_2,TimeFrame_2,Indicator_Name_2,Parameter1_2,Parameter2_2,Line_2,shift);
if(Parameter1_2!=-100 && Parameter2_2!=-100 && Parameter3_2!=-100 && Parameter4_2==-100 && Parameter5_2==-100)
value = iCustom(Pair_2,TimeFrame_2,Indicator_Name_2,Parameter1_2,Parameter2_2,Parameter3_2,Line_2,shift);
if(Parameter1_2!=-100 && Parameter2_2!=-100 && Parameter3_2!=-100 && Parameter4_2!=-100 && Parameter5_2==-100)
value = iCustom(Pair_2,TimeFrame_2,Indicator_Name_2,Parameter1_2,Parameter2_2,Parameter3_2,Parameter4_2,Line_2,shift);
if(Parameter1_2!=-100 && Parameter2_2!=-100 && Parameter3_2!=-100 && Parameter4_2!=-100 && Parameter5_2!=-100)
value = iCustom(Pair_2,TimeFrame_2,Indicator_Name_2,Parameter1_2,Parameter2_2,Parameter3_2,Parameter4_2,Parameter5_2,Line_2,shift);
break;
}
case 3 :
{
if(Parameter1_3!=-100 && Parameter2_3==-100 && Parameter3_3==-100 && Parameter4_3==-100 && Parameter5_3==-100)
value = iCustom(Pair_3,TimeFrame_3,Indicator_Name_3,Parameter1_3,Line_3,shift);
if(Parameter1_3!=-100 && Parameter2_3!=-100 && Parameter3_3==-100 && Parameter4_3==-100 && Parameter5_3==-100)
value = iCustom(Pair_3,TimeFrame_3,Indicator_Name_3,Parameter1_3,Parameter2_3,Line_3,shift);
if(Parameter1_3!=-100 && Parameter2_3!=-100 && Parameter3_3!=-100 && Parameter4_3==-100 && Parameter5_3==-100)
value = iCustom(Pair_3,TimeFrame_3,Indicator_Name_3,Parameter1_3,Parameter2_3,Parameter3_3,Line_3,shift);
if(Parameter1_3!=-100 && Parameter2_3!=-100 && Parameter3_3!=-100 && Parameter4_3!=-100 && Parameter5_3==-100)
value = iCustom(Pair_3,TimeFrame_3,Indicator_Name_3,Parameter1_3,Parameter2_3,Parameter3_3,Parameter4_3,Line_3,shift);
if(Parameter1_3!=-100 && Parameter2_3!=-100 && Parameter3_3!=-100 && Parameter4_3!=-100 && Parameter5_3!=-100)
value = iCustom(Pair_3,TimeFrame_3,Indicator_Name_3,Parameter1_3,Parameter2_3,Parameter3_3,Parameter4_3,Parameter5_3,Line_3,shift);
break;
}
}
return (value);
}
/*»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»««««««««««««««««««««««««««««««««««««««««««««««««««««
//»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»» DOCUMENTATION DIVISION ««««««««««««««««««««««««««««««««««
//»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»««««««««««««««««««««««««««««««««««««««««««««««««««««
««« PURPOSE, SCOPE, AND FUNCTION: »»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»
I know very much the pain of using iCustom function and thousand of requests asking me
about Alerts on crossing an indicator another indicator.
If you get tired of iCustom usage and Alerts embedding, this indicator for you!
You can use this indicator to load the indicators you want using iCustom function but
you will not write a line of code. All what will you do is entering the inputs of the
indicators you want to load in the Easy iCustom and Alerts input window and when the
indicator alerts you.
««« DESCRIPTION OF PROGRAM USAGE: »»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»
Parameters:
Alert_On_Crossing
Set this option to true if you want the indicator alerts you when any of the loaded
indicators has been crossed.
Pair_1
Set here the currency pair string you want to use with the first indicator. Use "NULL"
if you want to work with the current currency.
EXAMPLE: "EURUSD".
Indicator_Name_1
The name of the first indicator you want to load. This name must be the same as the
file name of the indicator without the .ex4 extension.
EXAMPLE: "Moving Averages" (the original file name is Moving Averages.ex4)
TimeFrame_1
The timeframe (in minutes) of the first indicator you want to load. use 0 if you want
to work with the current time frame.
EXAMPLE: 30
PERIOD_M1 1
PERIOD_M5 5
PERIOD_M15 15
PERIOD_M30 30
PERIOD_H1 60
PERIOD_H4 240
PERIOD_D1 1440
PERIOD_W1 10080
PERIOD_MN1 43200
Line_1
The line of the indicator you are loading that you want to use. It's zero based
number which means the first line is 0 and the second line is 1 and the last line
is 7 (The maximum value of lines allowed in any indicator are 8 and starts from 0,
then the last line is 7). The most of the indicator uses only one line, so you will
use 0 here.
Parameter1_1
Set the first parameter of the indicator you want to load as the first line. The
parameters of the indicator are any values declared as external variables. For
example the Moving Averages indicator accepts three parameters:
extern int MA_Period
extern int MA_Shift
extern int MA_Method
So, you have to enter the MA_Period here as the first parameter.
Parameter2_1
The second parameter of the indicator you want to load as the first line.
Parameter3_1
The third parameter of the indicator you want to load as the first line.
Parameter4_1
The fourth parameter of the indicator you want to load as the first line.
Parameter5_1
The fifth parameter of the indicator you want to load as the first line.
Pair_2
Set here the currency pair string you want to use with the second line.
Indicator_Name_2
The name of the second line you want to load.
TimeFrame_2
The timeframe (in minutes) of the second line you want to load.
Line_2
The line of the second indicator you are loading that you want to use.
Parameter1_2
Set the first parameter of the indicator you want to load as the second line.
Parameter2_2
The second parameter of the indicator you want to load as the second line.
Parameter3_2
The third parameter of the indicator you want to load as the second line.
Parameter4_2
The fourth parameter of the indicator you want to load as the second line.
Parameter5_2
The fifth parameter of the indicator you want to load as the second line.
Pair_3
Set here the currency pair string you want to use with the third line.
Indicator_Name_3
The name of the third line you want to load.
TimeFrame_3
The timeframe (in minutes) of the third line you want to load.
Line_3
The line of the second line you are loading that you want to use.
Parameter1_3
Set the first parameter of the indicator you want to load as the third line.
Parameter2_3
The second parameter of the indicator you want to load as the third line.
Parameter3_3
The third parameter of the indicator you want to load as the third line.
Parameter4_3
The fourth parameter of the indicator you want to load as the third line.
Parameter5_3
The fifth parameter of the indicator you want to load as the third line.
««« FILES DISCRIPTIONS: »»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»
««« TESTING AND SCRIP DEBUGING: »»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»
««« VERSION UPDATES: »»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»
Current Revisions:
Version 1.00.01 KTL 00-00-2006
*
Future Enhancement:
-
««« CODING, SCRIPT NOTES: »»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»
NOTE 1:
How to know how many lines (buffers) in an indicator?
Just open the source code of the indicator in MetaTrader and check the line:
#property indicator_buffers 1
The number 1 means 1 line and 2 means 2 line etc (up to 8 lines).
NOTE 2:
How to know how many parameters the indicator accept?
AS I told you before the parameters are the external functions that the indicator uses.
So, Open the indicator source code and check how many external functions it uses.
NOTE 3:
The order of the external functions declaration in the source code of the indicator
are the order of the parameters the indicator accept.
EXAMPLE:
extern int MA_Period = 13; <-- Parameter 1
extern int MA_Shift = 0; <-- Parameter 2
extern int MA_Method = 0; <-- Parameter 3
««« CODE STORAGE AREA: »»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»
//»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»«««««««««««««««««««««««««««««««««««««««««««««««««««««
//»»»»»»»»»»»»»»»»» END PROGRAM SCRIPT; MetaQuote Source Code [ mq4 ] ««««««««««««««««
//»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»««««««««««««««««««««««««««««««««« [rev.09-20-05] «««*/
Comments