Shi Channels_v1
Download script
This script is designed to provide visual technical analysis by identifying and projecting a dynamic price channel on your trading chart. It simplifies complex market structures into three distinct lines, helping traders visualize potential support, resistance, and the overall momentum of a price trend.
Core Logic and Functionality
1. Identifying Market Extremes (Fractals) The script begins by scanning a specific range of historical data (up to 240 bars) to find significant "peaks" and "valleys." It uses a logic similar to fractal geometry, where it looks for high points that are higher than their surrounding neighbors and low points that are lower than those around them. By identifying these two key extremes, the script establishes the primary boundaries of the market's current movement.
2. Dynamic Channel Calculation Once the two most relevant peaks or valleys are identified, the script calculates the "Step"—the mathematical rate of change between these two points. It then uses this data to project a linear channel forward into the future. This allows you to see where the price is mathematically "supposed" to be if it maintains its current trajectory.
3. Intelligent Trend Detection The logic automatically distinguishes between upward and downward trends. Depending on whether the identified fractal points were high or low, it adjusts the calculation to ensure the channel remains relevant to the current market direction. It effectively identifies the "slope" of the price movement.
4. Breakthrough & Violation Monitoring A key feature of this script is its ability to detect if the current price has broken out of the established channel. The logic performs a continuous check:
- If the price moves outside the projected boundaries, the script identifies the specific point of violation.
- When a breakthrough occurs, it marks that specific price level visually on your chart. This serves as an alert for traders that the current trend may be shifting or that a new market phase is beginning.
5. Visual Representation The script renders three distinct lines on your chart to provide a complete picture:
- Upper Boundary: The primary ceiling of the trend.
- Lower Boundary: The primary floor of the trend.
- Median Line: A dotted center line that represents the equilibrium point between the two boundaries, useful for identifying the "fair value" of the current move.
Summary for the Trader
In simple terms, this tool acts as a geometric guide. It looks back at recent history to find where the market turned, calculates the angle of those turns, and draws a "tunnel" forward. It highlights the boundaries of that tunnel and alerts you visually if the price manages to break through those walls, signaling potential change in market sentiment.
/*-----------------------------+
| |
| Shared by www.Aptrafx.com |
| |
+------------------------------*/
//+------------------------------------------------------------------+
//| SHI_Channel.mq4 |
//| Copyright © 2004, Shurka & Kevin |
//| |
//+------------------------------------------------------------------+
#property copyright "Copyright © 2004, Shurka & Kevin"
#property link ""
#property indicator_chart_window
#property indicator_buffers 1
#property indicator_color1 Red
double ExtMapBuffer1[];
//---- input parameters
extern int AllBars=240;
extern int BarsForFract=0;
int CurrentBar=0;
double Step=0;
int B1=-1,B2=-1;
int UpDown=0;
double P1=0,P2=0,PP=0;
int i=0,AB=300,BFF=0;
int ishift=0;
double iprice=0;
datetime T1,T2;
//+------------------------------------------------------------------+
//| Custom indicator initialization function |
//+------------------------------------------------------------------+
int init()
{
//---- indicators
SetIndexStyle(0,DRAW_ARROW);
SetIndexArrow(0,164);
SetIndexBuffer(0,ExtMapBuffer1);
SetIndexEmptyValue(0,0.0);
//----
return(0);
}
//+------------------------------------------------------------------+
//| Custor indicator deinitialization function |
//+------------------------------------------------------------------+
int deinit()
{
//----
//----
return(0);
}
void DelObj()
{
ObjectDelete("TL1");
ObjectDelete("TL2");
ObjectDelete("MIDL");
}
//+------------------------------------------------------------------+
//| Custom indicator iteration function |
//+------------------------------------------------------------------+
int start()
{
int counted_bars=IndicatorCounted();
//----
if ((AllBars==0) || (Bars<AllBars)) AB=Bars; else AB=AllBars; //AB-êîëè÷åñòâî îáñ÷èòûâàåìûõ áàðîâ
if (BarsForFract>0)
BFF=BarsForFract;
else
{
switch (Period())
{
case 1: BFF=12; break;
case 5: BFF=48; break;
case 15: BFF=24; break;
case 30: BFF=24; break;
case 60: BFF=12; break;
case 240: BFF=15; break;
case 1440: BFF=10; break;
case 10080: BFF=6; break;
default: DelObj(); return(-1); break;
}
}
CurrentBar=2; //ñ÷èòàåì ñ òðåòüåãî áàðà, ÷òîáû ôðàêòàë "çàêðåïèëñÿ
B1=-1; B2=-1; UpDown=0;
while(((B1==-1) || (B2==-1)) && (CurrentBar<AB))
{
//UpDown=1 çíà÷èò ïåðâûé ôðàêòàë íàéäåí ñâåðõó, UpDown=-1 çíà÷èò ïåðâûé ôðàêòàë
//íàéäåí ñíèçó, UpDown=0 çíà÷èò ôðàêòàë åù¸ íå íàéäåí.
//Â1 è Â2 - íîìåðà áàðîâ ñ ôðàêòàëàìè, ÷åðåç íèõ ñòðîèì îïîðíóþ ëèíèþ.
//Ð1 è Ð2 - ñîîòâåòñòâåííî öåíû ÷åðåç êîòîðûå áóäåì ëèíèþ ïðîâîäèòü
if((UpDown<1) && (CurrentBar==Lowest(Symbol(),Period(),MODE_LOW,BFF*2+1,CurrentBar-BFF)))
{
if(UpDown==0) { UpDown=-1; B1=CurrentBar; P1=Low[B1]; }
else { B2=CurrentBar; P2=Low[B2];}
}
if((UpDown>-1) && (CurrentBar==Highest(Symbol(),Period(),MODE_HIGH,BFF*2+1,CurrentBar-BFF)))
{
if(UpDown==0) { UpDown=1; B1=CurrentBar; P1=High[B1]; }
else { B2=CurrentBar; P2=High[B2]; }
}
CurrentBar++;
}
if((B1==-1) || (B2==-1)) {DelObj(); return(-1);} // Çíà÷èò íå íàøëè ôðàêòàëîâ ñðåäè 300 áàðîâ 8-)
Step=(P2-P1)/(B2-B1);//Âû÷èñëèëè øàã, åñëè îí ïîëîæèòåëüíûé, òî êàíàë íèñõîäÿùèé
P1=P1-B1*Step; B1=0;//ïåðåñòàâëÿåì öåíó è ïåðâûé áàð ê íóëþ
//À òåïåðü îïîðíóþ òî÷êó ïðîòèâîïîëîæíîé ëèíèè êàíàëà.
ishift=0; iprice=0;
if(UpDown==1)
{
PP=Low[2]-2*Step;
for(i=3;i<=B2;i++)
{
if(Low[i]<PP+Step*i) { PP=Low[i]-i*Step; }
}
if(Low[0]<PP) {ishift=0; iprice=PP;}
if(Low[1]<PP+Step) {ishift=1; iprice=PP+Step;}
if(High[0]>P1) {ishift=0; iprice=P1;}
if(High[1]>P1+Step) {ishift=1; iprice=P1+Step;}
}
else
{
PP=High[2]-2*Step;
for(i=3;i<=B2;i++)
{
if(High[i]>PP+Step*i) { PP=High[i]-i*Step;}
}
if(Low[0]<P1) {ishift=0; iprice=P1;}
if(Low[1]<P1+Step) {ishift=1; iprice=P1+Step;}
if(High[0]>PP) {ishift=0; iprice=PP;}
if(High[1]>PP+Step) {ishift=1; iprice=PP+Step;}
}
//Òåïåðü ïåðåñòàâèì êîíå÷íóþ öåíó è áàð íà ÀÂ, ÷òîáû ëèíèè êàíàëà ðèñîâàëèñü ïîäëèííåå
P2=P1+AB*Step;
T1=Time[B1]; T2=Time[AB];
//Åñëè íå áûëî ïåðåñå÷åíèÿ êàíàëà, òî 0, èíà÷å ñòàâèì ïñèñó.
if(iprice!=0) ExtMapBuffer1[ishift]=iprice;
DelObj();
ObjectCreate("TL1",OBJ_TREND,0,T2,PP+Step*AB,T1,PP);
ObjectSet("TL1",OBJPROP_COLOR,Lime);
ObjectSet("TL1",OBJPROP_WIDTH,2);
ObjectSet("TL1",OBJPROP_STYLE,STYLE_SOLID);
ObjectCreate("TL2",OBJ_TREND,0,T2,P2,T1,P1);
ObjectSet("TL2",OBJPROP_COLOR,Lime);
ObjectSet("TL2",OBJPROP_WIDTH,2);
ObjectSet("TL2",OBJPROP_STYLE,STYLE_SOLID);
ObjectCreate("MIDL",OBJ_TREND,0,T2,(P2+PP+Step*AB)/2,T1,(P1+PP)/2);
ObjectSet("MIDL",OBJPROP_COLOR,Lime);
ObjectSet("MIDL",OBJPROP_WIDTH,1);
ObjectSet("MIDL",OBJPROP_STYLE,STYLE_DOT);
//----
return(0);
}
//+------------------------------------------------------------------+
Comments