SDX-ZoneBreakout-Lud-Z2-v2_v1

Download script
Author: Copyright Shimodax
SDX-ZoneBreakout-Lud-Z2-v2_v1

This tool is designed for traders who use a breakout strategy, specifically tailored for major currency pairs like EUR/USD and GBP/USD. Its primary purpose is to automatically identify specific price ranges during the early morning trading hours and project potential entry points, targets, and stop-loss levels on the chart.

Core Logic and Functionality

1. Time-Based Zone Identification The script operates by dividing the trading day into distinct time blocks based on your local time zone. It focuses specifically on identifying price action during two primary "setup" periods:

  • Period 1: Early morning hours.
  • Period 2: Mid-morning hours.

The logic scans these specific windows to find the highest and lowest prices reached. Once these periods conclude, the script "locks in" those boundaries to create a breakout zone.

2. Dynamic Range Projection Once the second period ends, the script calculates a trading zone based on the high and low points captured during that timeframe. It then projects several key levels:

  • Entry Lines: These are established by adding or subtracting a specific number of pips (user-defined) from the high/low of the captured range.
  • Target Levels: The script automatically calculates where a "Take Profit" might be, based on a fixed pip goal provided in the settings.
  • Stop-Loss Levels: It projects potential stop points to help manage risk. If the calculated range is too narrow (smaller than your minimum allowed pips), it will intelligently hide these lines to prevent invalid trades.

3. Breakout Signal Detection The script doesn't just draw lines; it actively monitors the market price to see if it "breaks out" of the established zone. It looks for specific candlestick behavior:

  • Buy Signals: Triggered when the price moves from below the upper entry line to above it.
  • Sell Signals: Triggered when the price moves from above the lower entry line to below it.

When these breakouts occur, the script places visual arrows on the chart to alert the trader of a potential entry opportunity.

4. Automation and Visual Feedback To make the trading process seamless, the script provides several visual aids:

  • Visual Markers: It draws continuous lines for targets, stops, and zones so you can see the "map" of the trade at a glance.
  • Signal Arrows: These clearly mark the exact moment the price breaks out of the zone.
  • Daily Resets: The logic is designed to automatically refresh every new day, clearing out old data and identifying new ranges based on that day's specific price action.

In summary, this tool automates the tedious task of manually measuring highs and lows during morning sessions, providing a clear visual blueprint for when to enter, where to take profit, and where to exit a breakout trade.

Miscellaneous
Implements a curve of type %1It issuies visual alerts to the screen
12 Views
0 Downloads
0 Favorites
SDX-ZoneBreakout-Lud-Z2-v2_v1 
/*-----------------------------+
|			       |
| Shared by www.Aptrafx.com    |
|			       |
+------------------------------*/

//+------------------------------------------------------------------+
//|  TZ-Breaktout-Z2.mq4                                             |
//|  Shimodax                                                        |
//|                                                                  |
//+------------------------------------------------------------------+

#property copyright "Copyright Shimodax"
#property link      "http://www.strategybuilderfx.com/forums/showthread.php?t=15439"


/* Introduction:

   Draw ranges for "Simple Combined Breakout System for EUR/USD and GBP/USD" thread
   (see http://www.strategybuilderfx.com/forums/showthread.php?t=15439)

   TimeZoneOfData: TimeZone for which MT4 shows your local time, 
                  e.g. 1 or 2 for Europe (GMT+1 or GMT+2 (daylight 
                  savings time).  Use zero for no adjustment.
                  
                  The MetaQuotes demo server uses GMT +2.   
   Enjoy  :-)
   
   Markus

*/


#property indicator_chart_window
#property indicator_buffers 8
#property indicator_color1 Blue
#property indicator_color2 Purple
#property indicator_color3 Blue
#property indicator_color4 Purple
#property indicator_color5 Blue
#property indicator_color6 Purple
#property indicator_color7 Yellow
#property indicator_color8 Yellow


extern bool DoEntryAlerts= false;
extern int TimeZoneOfData= 3;  // time zone of metatrader charts
extern int PipsForEntry= 5;
extern int PipsTarget = 80;
extern int PipsStop= 50;
extern int ShowTarget= 1;
extern int ShowStop= 1;

int DestTimeZone= 0;   // dest time zone for time computation (leave as zero (GMT))




double Zone2Upper[];
double Zone2Lower[];
double Zone2UpperTarget[];
double Zone2LowerTarget[];
double Zone2UpperStop[];
double Zone2LowerStop[];
double EntryUpperSignalsBuffer[];
double EntryLowerSignalsBuffer[];
bool Zone2UpperBreakout=False;
bool Zone2LowerBreakout=False;
       



//+------------------------------------------------------------------+
//| Custom indicator initialization function                         |
//+------------------------------------------------------------------+
int init()
{
   SetIndexStyle(0,DRAW_LINE);
   SetIndexBuffer(0,Zone2Upper);
   SetIndexEmptyValue(0, 0.0);
   SetIndexLabel(0, "Z2 Upper");

   SetIndexStyle(1,DRAW_LINE);
   SetIndexBuffer(1,Zone2Lower);
   SetIndexEmptyValue(1, 0.0);
   SetIndexLabel(1, "Z2 Lower");

   SetIndexStyle(2,DRAW_LINE);
   SetIndexBuffer(2,Zone2UpperTarget);
   SetIndexEmptyValue(2, 0.0);
   SetIndexLabel(2, "Z2 Upper Target");

   SetIndexStyle(3,DRAW_LINE);
   SetIndexBuffer(3,Zone2LowerTarget);
   SetIndexEmptyValue(3, 0.0);
   SetIndexLabel(3, "Z2 Lower Target");

   SetIndexStyle(2,DRAW_LINE, STYLE_DASH, 1);
   SetIndexBuffer(2,Zone2UpperTarget);
   SetIndexEmptyValue(2, 0.0);
	SetIndexLabel(2, "Z2 Upper Target");

   SetIndexStyle(3,DRAW_LINE, STYLE_DASH, 1);
   SetIndexBuffer(3,Zone2LowerTarget);
   SetIndexEmptyValue(3, 0.0);
   SetIndexLabel(3, "Z2 Lower Target");

   SetIndexStyle(4,DRAW_LINE, STYLE_DASHDOTDOT, 1);
   SetIndexBuffer(4,Zone2UpperStop);
   SetIndexEmptyValue(4, 0.0);
	SetIndexLabel(4, "Z2 Upper Stop");

   SetIndexStyle(5,DRAW_LINE, STYLE_DASHDOTDOT, 1);
   SetIndexStyle(5,DRAW_LINE);
   SetIndexBuffer(5,Zone2LowerStop);
   SetIndexEmptyValue(5, 0.0);
   SetIndexLabel(5, "Z2 Lower Stop");

   SetIndexStyle(6,DRAW_ARROW);
   SetIndexArrow(6, 162);
   SetIndexBuffer(6, EntryUpperSignalsBuffer);
   SetIndexEmptyValue(6, 0.0);
   SetIndexLabel(6, "Z2 Upper Breakout");

   SetIndexStyle(7,DRAW_ARROW);
   SetIndexArrow(7, 162);
   SetIndexBuffer(7, EntryLowerSignalsBuffer);
   SetIndexEmptyValue(7, 0.0);
   SetIndexLabel(7, "Z2 Lower Breakout");

   return(0);
}

int deinit()
{

   return(0);
}
  
//+------------------------------------------------------------------+
//| Custom indicator iteration function                              |
//+------------------------------------------------------------------+
int start()
{
   int counted_bars= IndicatorCounted(),
         lastbar, result;

   if (Bars<=100) 
      return(0);
      
   if (counted_bars>0)
      counted_bars--;
      
   lastbar= Bars - counted_bars;
   
   
   //
   // compute ranges
   //
   BreakoutRanges(0, lastbar, TimeZoneOfData, DestTimeZone);
   
   
   //
   // check alerts   
   //
   static datetime lastalerttime;
   static double lastalertprice;

/*
   if (DoEntryAlerts && lastalerttime!=Time[0] && EntrySignalsBuffer[0]!=0 && EntrySignalsBuffer[0]!=lastalertprice) {
      Alert("ZoneBreakout signals entry!");
      lastalerttime= Time[0];
      lastalertprice= EntrySignalsBuffer[0];
   } 
   else {
      lastalerttime= 0;
      lastalertprice= 0.0;
   }
*/

   return(0);
}

 
//+------------------------------------------------------------------+
//| Compute Breakout ranges for daily time periods                   |
//+------------------------------------------------------------------+
int BreakoutRanges(int offset, int lastbar, int tzlocal, int tzdest)
{     
   int i, j, k,
       tzdiff= tzlocal - tzdest,
       tzdiffsec= tzdiff*3600, 
       tidxstart[2]= { 0, 0}, 
       tidxend[2]= { 0, 0 };
   double thigh[2]= { 0.0, 0.0 }, 
           tlow[2]= { 99999.9, 99999.9 };
   string tfrom[3]= { "04:00", "08:00" ,  /*rest of day: */ "12:00"},
          tto[3]=   { "08:00", "12:00",   /*rest of day: */ "24:00" },
          tday;
   bool inperiod= -1;
   datetime timet;
   

   //
   // search back for the beginning of the day
   //
   tday= TimeToStr(Time[lastbar]-tzdiffsec, TIME_DATE);   
   for (  ; lastbar<Bars; lastbar++) {
      if (TimeToStr(Time[lastbar] - tzdiffsec, TIME_DATE)!=tday) {
         lastbar--;
         break;      
      }
   }   



   //
   // find the high/low for the two periods and carry them forward through the day
   //
   tday= "XXX";
   for (i= lastbar; i>=offset; i--) {
   
      timet= Time[i] - tzdiffsec;   // time of this bar
      
      string timestr= TimeToStr(timet, TIME_MINUTES),    // current time HH:MM
             thisday= TimeToStr(timet, TIME_DATE);       // current date
          
      EntryUpperSignalsBuffer[i]= 0;   
      EntryLowerSignalsBuffer[i]= 0;   
          
      //
      // for all three periods (first period, second period, rest of day)
      //
      for (j= 0; j<3; j++) {
      
         if (tfrom[j]<=timestr && timestr<tto[j]) {   // Bar[i] in this period
      
            if (inperiod!=j) { // entered new period, so last one is completed
                                 
               if (j>0) {      // now draw high/low back over the recently completed period
               
                  for (k= tidxstart[j-1]; k>=tidxend[j-1]; k--) {
                     if (j-1==1) {
                        Zone2Upper[k]= thigh[j-1];
                        Zone2Lower[k]= tlow[j-1];
                     }
                  }
               }
               
               inperiod= j;   // remember current period
            }
            
            if (inperiod==2)   // inperiod==2 (end of day) is just to check completion of zone 2
               break;


            // for the current period find idxstart, idxend and compute high/low
            if (tidxstart[j]==0) {
               tidxstart[j]= i;
               tday= thisday;
            }
         
            tidxend[j]= i;
      
            thigh[j]= MathMax(thigh[j], High[i]);
            tlow[j]= MathMin(tlow[j], Low[i]);
         }
      }
      
      
      // 
      // carry forward the periods for which we have definite high/lows
      //
      if (inperiod>=1 && tday==thisday) { // first time period completed
         if (inperiod>=2) {   // second period completed
            Zone2Upper[i]= thigh[1] + PipsForEntry*Point;
            Zone2Lower[i]= tlow[1] - PipsForEntry*Point;
            if (ShowTarget==1)
              {
               Zone2UpperTarget[i]= thigh[1] + PipsForEntry*Point+PipsTarget*Point;
               Zone2LowerTarget[i]= tlow[1] - PipsForEntry*Point-PipsTarget*Point;
              }
            if (ShowStop==1)
              {
               if(Zone2Upper[i]-Zone2Lower[i]>PipsStop*Point)
                 {
                  Zone2UpperStop[i]= Zone2Upper[i]-PipsStop*Point;  
                  Zone2LowerStop[i]= Zone2Lower[i]+PipsStop*Point;  
                 }
               else
                 {
                  Zone2UpperStop[i]= 0;  
                  Zone2LowerStop[i]= 0;  
                 }
             }
         }
         
         CheckSignal(i, Zone2Upper[i], OP_BUY, EntryUpperSignalsBuffer);
         CheckSignal(i, Zone2Lower[i], OP_SELL, EntryLowerSignalsBuffer);
      }
      else {   // none yet to carry forward (zero to clear old values, e.g. from switching timeframe)
         Zone2Upper[i]= 0;
         Zone2Lower[i]= 0;
         Zone2UpperTarget[i]= 0;
         Zone2LowerTarget[i]= 0;
         Zone2UpperStop[i]= 0;
         Zone2LowerStop[i]= 0;
      }
     

      //
      // at the beginning of a new day reset everything
      //
      if (tday!="XXX" && tday!=thisday || TimeToStr(timet, TIME_MINUTES)>=tto[2]) {
         // Print("#", i, "new day ", thisday, "/", tday);
      
         tday= "XXX";
         
         Zone2UpperBreakout = False;
         Zone2LowerBreakout = False;        

         inperiod= -1;
         
         for (j= 0; j<2; j++) {
            tidxstart[j]= 0;
            tidxend[j]= 0;
         
            thigh[j]= 0;
            tlow[j]= 99999;
         }
      }
   }

   return (0);       
}




//+------------------------------------------------------------------+
//| Check price break                                                |
//+------------------------------------------------------------------+
bool CheckSignal(int shift, double price, int type, double &signalbuffer[]) 
{
   bool signal= false;

   if (Zone2UpperBreakout==False && type==OP_BUY && ((Open[shift]<price && High[shift]>price) || (Close[shift+1]<price && Open[shift]>price)) ) {
      signalbuffer[shift]= price;
      signal= true;
      Zone2UpperBreakout=True;
  }

   if (Zone2LowerBreakout==False && type==OP_SELL && (Open[shift]>price && Low[shift]<price) || (Close[shift+1]>price && Open[shift]<price)) {
      signalbuffer[shift]= price;
      signal= true;
      Zone2LowerBreakout=True;
  }
  
  return (signal);
}

Similar scripts

[INDI]_SDX-ZoneBreakout-Lud-Z2-v2_v1

This indicator identifies price expansion by projecting breakout boundaries from predefined historical time sessions and marking potential trade entries, targets, and stops.

oilfxpro gbp breakout corrected

This indicator identifies intraday volatility boundaries by capturing high and low price extremes from specific time windows to project potential breakout levels.

[INDI]_SDX-ZoneBreakout-Lud-Z2-v2

This indicator identifies and visualizes high/low price boundaries from specific intraday time sessions to generate breakout signals with integrated target and stop-loss levels.

SDX-ZoneBreakout-Lud-Z2-v2

Identifies high-probability trade setups by monitoring price breakouts from specific daily volatility windows and projecting subsequent target levels.

SDX-ZoneBreakout-Lud-Z2_v1

Identifies bullish and bearish entry signals by monitoring price ruptures of high and low ranges established during specific morning time windows.

[INDI]_SDX-ZoneBreakout-Lud-Z1-v2_v2

This indicator identifies price expansion opportunities by projecting dynamic supply and demand boundaries based on high/low extremes within specific historical time windows.

uINDIo_SDX-ZoneBreakout-Lud-Z1-v2

SDX-ZoneBreakout2_v1

This indicator identifies high-volatility breakout points by mapping price extremes from specific daily time windows and detecting momentum shifts beyond those established boundaries.

SDX-ZoneBreakout1

This indicator identifies bullish and bearish momentum by detecting price breaches of high and low boundaries established during specific predefined temporal windows.

SDX-ZoneBreakout_v1

This indicator identifies volatility boundaries by projecting high and low price extremes from specific chronological windows into forward-moving breakout zones.

[INDI]_SDX-ZoneBreakout-Lud-Z1-v2

This indicator identifies price expansion by monitoring breakouts from high and low extremes established during specific morning time windows on a daily basis.

Comments