EMA_CROSS_Derk_v01

/*-----------------------------+
|			       |
| Shared by www.Aptrafx.com    |
|			       |
+------------------------------*/

//=============================================================================
//												EMA_CROSS_Derk_v01.mq4
//												Originally by: Coders Guru
//												http://www.forex-tsd.com
//
// Modified by Robert Hill as follows:
// -----------------------------------
// 6/4/2006		Fixed bugs and added exit on fresh cross option
//
//				Added use of TakeProfit of 0
//
//				Modified for trade on open of closed candle
//
//				Added Trades in this symbol and MagicNumber check
//				to allow trades on different currencies at same time
//
//
//
// Modified by Derk Wehler as follows:
// -----------------------------------
// 7/19/2006	Reformatted code, added comments
//
//				Added HandleTrailingStop() function and changed start()
//				function to use it.
//
//				Added use of OrderReliable library
//
//				Added extern TrailingStopType (which should always be
//				set to either 1 or 2), for use with new HandleTrailingStop()
//
//
//
// TODO: Add Money Management routine
//
//=============================================================================

#property copyright "Coders Guru"
#property link		"http://www.forex-tsd.com"

#include <OrderReliable_V0_2_5.mqh>


//---- input parameters
extern double	TakeProfit			= 130;
extern double	StopLoss 			= 100;
extern double	Lots				= 1;
extern int		TrailingStopType 	= 2;
extern double	TrailingStop		= 20;

extern int 		ShortEma 			= 10;	// 17?
extern int 		LongEma 			= 80;	// 40?
extern bool 	ExitOnCross 		= false;
extern int 		SignalCandle 		= 0;
extern int 		MagicNumber 		= 54145;




//=============================================================================
// expert initialization function
//=============================================================================
int init()
{
	return(0);
}


//=============================================================================
// expert deinitialization function
//=============================================================================
int deinit()
{
	return(0);
}


//=============================================================================
//
//								FreshCross()
//
//	Function to tell whether or not there is a "fresh" cross.  
//
//	RETURN VALUE:
//
//		1:	If the short MA line is above the long, and was below on the  
//			previous candle
//
//		2:	If the short MA line is below the long, and was above on the  
//			previous candle
//
//		0:	If the the EMA lines of the current and previous candle are 
//			in the same position relative to each other
//
//=============================================================================
int FreshCross()
{
	double SEma, LEma,SEmaP, LEmaP;

	SEma = iMA(NULL, 0, ShortEma, 0, MODE_EMA, PRICE_CLOSE, SignalCandle);
	LEma = iMA(NULL, 0, LongEma, 0, MODE_EMA, PRICE_CLOSE, SignalCandle);
	
	SEmaP = iMA(NULL, 0, ShortEma, 0, MODE_EMA, PRICE_CLOSE, SignalCandle+1);
	LEmaP = iMA(NULL, 0, LongEma, 0, MODE_EMA, PRICE_CLOSE, SignalCandle+1);

	// Don't work in the first load, wait for the first cross!

	if (SEma > LEma && SEmaP < LEmaP) // up
		return(1); 
		
	if (SEma < LEma && SEmaP > LEmaP) // down
		return(2); 

	return (0); // has not changed
}

//=============================================================================
//
//								CheckOpenTrades()
//
//	RETURN VALUE:
//
//		The number of trades this EA has currently open
//
//=============================================================================
int CheckOpenTrades()
{
	int cnt;
	int NumTrades;	// Number of buy and sell trades in this symbol
	
	NumTrades = 0;
	for (cnt=OrdersTotal()-1; cnt>=0; cnt--)
	{
		OrderSelect (cnt, SELECT_BY_POS, MODE_TRADES);
		if (OrderSymbol() != Symbol()) 
			continue;
			
		if (OrderMagicNumber() != MagicNumber)
			continue;
		
		if (OrderType() == OP_BUY)  
			NumTrades++;
			
		if (OrderType() == OP_SELL) 
			NumTrades++;
				 
	}
	return (NumTrades);
}


//=============================================================================
// expert start function
//=============================================================================
int start()
{
	int cnt, ticket, total;
	double TP;	
	
	if (Bars < 100)
	{
		Print("bars less than 100");
		return(0);  
	}


	
	int isCrossed = FreshCross();
	
	total = CheckOpenTrades();
	if (total < 1) 
	{
		if (isCrossed == 1)
		{
			TP = 0;
			if (TakeProfit > 0) 
				TP = Ask + TakeProfit * Point;
				
			ticket = OrderSendReliable(Symbol(), OP_BUY, Lots, Ask, 3, Ask - StopLoss*Point, 
										TP, "EMA_CROSS", MagicNumber, 0, Green);
			if (ticket > 0)
			{
				if (OrderSelect(ticket,SELECT_BY_TICKET,MODE_TRADES)) 
					Print("BUY order opened : ", OrderOpenPrice());
			}
			else 
				Print("Error opening BUY order : ", GetLastError()); 
			return(0);
		}
		
		if (isCrossed == 2)
		{
			TP = 0;
			if (TakeProfit > 0) 
				TP = Bid - TakeProfit * Point;
			ticket = OrderSendReliable(Symbol(), OP_SELL, Lots, Bid, 3, Bid + StopLoss*Point,
										TP, "EMA_CROSS", MagicNumber, 0, Red);
			if (ticket > 0)
			{
				if (OrderSelect(ticket, SELECT_BY_TICKET, MODE_TRADES)) 
					Print("SELL order opened : ", OrderOpenPrice());
			}
			else 
				Print("Error opening SELL order : ", GetLastError()); 
			return(0);
		}
		return(0);
	} 
	  
	for (cnt=0; cnt < total; cnt++)
	{
		OrderSelect(cnt, SELECT_BY_POS, MODE_TRADES);
		
		if (OrderSymbol() != Symbol() || OrderMagicNumber() != MagicNumber)
			continue;

		// Should it be closed because of a cross reversal?
		bool result = false;
		if (ExitOnCross && isCrossed != 0)
		{
			// We have a long position open and MAs have switched
			if (OrderType() == OP_BUY && isCrossed == 2)
			{		  
				// Close position
				result = OrderCloseReliable(OrderTicket(), OrderLots(), Bid, 3, Violet); 
				if (!result)
				{
					Print("In OP_BUY, ExitOnCross=TRUE && isCrossed=2, but FAILED to exit.");
					Alert("In OP_BUY, ExitOnCross=TRUE && isCrossed=2, but FAILED to exit.");
				}
			}
		
			// We have a short position open and MAs have switched
			else if (OrderType() == OP_SELL && isCrossed == 1)
			{				
				// Close position
				result = OrderCloseReliable(OrderTicket(), OrderLots(), Ask, 3, Violet);
				if (!result)
				{
					Print("In OP_SELL, ExitOnCross=TRUE && isCrossed=1, but FAILED to exit.");
					Alert("In OP_SELL, ExitOnCross=TRUE && isCrossed=1, but FAILED to exit.");
				}
			}
		}
		
		if (!result)	// Handle mods to trailing stop
			HandleTrailingStop(OrderType(), OrderTicket(), OrderOpenPrice(), OrderStopLoss(), OrderTakeProfit());
	}

	return(0);
}


//=============================================================================
//
// 							HandleTrailingStop()
//
//	Type 1 moves the stoploss without delay.
//
//	Type 2 waits for price to move the amount of the trailStop
//	before moving stop loss then moves like type 1
//
//	Type 3 uses up to 3 levels for trailing stop
//		Level 1 Move stop to 1st level
//		Level 2 Move stop to 2nd level
//		Level 3 Trail like type 1 by fixed amount other than 1
//			NOTE: Level3 Removed for now (see below) 
//
//	Possible future types
//	Type 4 uses 2 for 1, every 2 pip move moves stop 1 pip
//	Type 5 uses 3 for 1, every 3 pip move moves stop 1 pip
//
//	PARAMETERS:
//
//		type:		OP_BUY or OP_SELL
//		ticket:		the ticket number
//		open_price:	the order's open price
//		cur_sl:		the order's current StopLoss value
//		cur_tp:		the order's current TakeProfit value
//
//	RETURN VALUE:
//		zero for now
//
//  Calling example 
//	HandleTrailingStop("BUY",OrderTicket(),OrderOpenPrice(),OrderStopLoss(),OrderTakeProfit());
//
//=============================================================================
int HandleTrailingStop(int type, int ticket, double open_price, double cur_sl, double cur_tp)
{
	double pt, TS = 0;

	if (type == OP_BUY)
	{
		switch (TrailingStopType)
		{
			case 1: 
				pt = Point * StopLoss;
				if (Bid - cur_sl > pt) 
					OrderModifyReliable(ticket, open_price, Bid - pt, cur_tp, 0, Aqua);
				break;
				
			case 2: 
				pt = Point * TrailingStop;
				if (Bid - open_price > pt && (cur_sl < Bid - pt || cur_sl == 0))
					OrderModifyReliable(ticket, open_price, Bid - pt, cur_tp, 0, Aqua);
				break;

/*	Removed until we decide if we really want this for this EA
			case 3: 
				if (Bid - open_price > FirstMove * Point)
				{
					TS = open_price + FirstMove * Point - FirstStopLoss * Point;
					if (cur_sl < TS)
						OrderModifyReliable(ticket, open_price, TS, cur_tp, 0, Aqua);
				}

				if (Bid - open_price > SecondMove * Point)
				{
					TS = open_price + SecondMove * Point - SecondStopLoss * Point;
					if (cur_sl < TS)
						OrderModifyReliable(ticket, open_price, TS, cur_tp, 0, Aqua);
				}
	  
	 			if (Bid - open_price > ThirdMove * Point)
	 			{
		 			TS = Bid  - TrailingStop3 * Point;
	 				if (cur_sl < TS)
						OrderModifyReliable(ticket, open_price, TS, cur_tp, 0, Aqua);
	 			}
	 			break;
*/
		}
		return(0);
	}


	else if (type ==  OP_SELL)
	{
		switch (TrailingStopType)
		{
			case 1: 
				pt = Point * StopLoss;
				if (cur_sl - Ask > pt) 
					OrderModifyReliable(ticket, open_price, Ask+pt, cur_tp, 0, Aqua);
				break;
				
			case 2: 
				pt = Point * TrailingStop;
				if (open_price - Ask > pt && (cur_sl > Ask + pt || cur_sl == 0))
					OrderModifyReliable(ticket, open_price, Ask+pt, cur_tp, 0, Aqua);
				break;
				
/*	Removed until we decide if we really want this for this EA
			case 3: 
				if (open_price - Ask > FirstMove * Point)
				{
					TS = open_price - FirstMove * Point + FirstStopLoss * Point;
					if (cur_sl > TS)
						OrderModifyReliable(ticket, open_price, TS, cur_tp, 0, Aqua);
				}
				
				if (open_price - Ask > SecondMove * Point)
				{
					TS = open_price - SecondMove * Point + SecondStopLoss * Point;
					if (cur_sl > TS)
						OrderModifyReliable(ticket, open_price, TS, cur_tp, 0, Aqua);
				}
				
				if (open_price - Ask > ThirdMove * Point)
				{
					TS = Ask + TrailingStop3 * Point;					
					if (cur_sl > TS)
						OrderModifyReliable(ticket, open_price, TS, cur_tp, 0, Aqua);
			}
			break;
*/
		 }
	 }
	 return(0);
}